Lincoln Nautilus: Starting and Stopping the Engine / Automatic Engine Stop
What Is Automatic Engine Stop
Automatic engine stop is a feature that
switches the engine off if it has been idling
for an extended period to help you save fuel.
How Does Automatic Engine Stop Work
Automatic engine stop turns the engine off.
The ignition also turns off in order to save
battery power. Before the engine shuts
down, a message appears in the information
display showing a timer counting down. If
you do not intervene within 30 seconds, the
engine shuts down. Another message
appears in the information display to inform
you that the engine has shut down in order
to save fuel. Start your vehicle as you
normally do.
Switching Automatic Engine Stop On and Off
- Press the menu button on the steering
wheel to enter the information display
main menu.
- Select Settings.
- Switch Auto Engine Off on or off.
Note: You cannot permanently switch off
the automatic shutdown. If you switch it off,
it turns on each time you switch the ignition
on.
Overriding Automatic Engine Stop
Note: You cannot permanently switch off the
automatic engine shutdown feature. When
you switch it off temporarily, it turns on at
the next ignition cycle.
You can stop the engine shutdown, or reset
the timer, at any point before the 30-second
countdown has expired by doing any of the
following:
- Pressing the brake pedal or accelerator
pedal.
- Pressing the OK or RESET button during
the countdown.
Stopping the Engine When Your Vehicle is Stationary
Shift into park (P).
Apply the parking brake.
Wait until the engine reaches idle speed.
Press the push button ignition switch...
If you are unable to start the engine, do the
following:
Open the floor console storage
compartment lid.
With the buttons facing upward and the
unlock button facing the front of your
vehicle, place the passive key into the
backup slot...
Other information:
Locating the USB Ports
Data Transfer USB Ports
The USB Ports could be in the following
locations:
On the lower instrument panel.
Inside the media bin.
Inside the center console.
Note: These USB ports can also charge
devices.
Note: Not all USB ports in your vehicle have
data transfer capabilities...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the scan tool prior to
removing the module. This information must be downloaded into the new
module after installation...