Lincoln Nautilus: Automatic Transmission / Automatic Transmission Position Indicators
The instrument cluster displays the current
position.
Note: The position could illuminate on the
transmission selector.
The gear selector is located near the middle
of the instrument panel. Press a button to
select a gear.
Park (P)
Reverse (R)
Neutral (N)
Drive (D)
Sport (S) (If equipped)
Note: The gear selector prevents shifting out
of park (P) when the intelligent access key
is outside the vehicle...
Shifting Using the Paddle Shifters
Use this procedure to shift your transmission
manually.
Manually Shifting in Drive (D)
Use this feature when you need immediate
shift response, for example overtaking
another vehicle...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new module, it is necessary to upload the
module configuration information to the scan tool prior to removing the
module. This information must be downloaded into the new module after
installation...
Removal
Detach the clips and pivot the instrument panel LH lower trim panel downward.
Remove the headlamp switch.
Disconnect the headlamp switch electrical connector.
Release the tabs and remove the headlamp switch from the instrument panel LH lower trim panel...
Categories
WARNING: If the tire pressure
monitor sensor becomes damaged it may
not function.
Note: The use of tire sealant may damage
your tire pressure monitoring system and
should only be used in roadside
emergencies. If you must use a sealant, use
the Tire Mobility Kit sealant. Replace the tire
pressure monitoring system sensor and
valve stem on the wheel by an authorized
dealer after use of the sealant.
Note: The tire pressure monitoring system
indicator light will illuminate when the spare
tire is in use. To restore the full function of
the monitoring system, all road wheels
equipped with tire pressure monitoring
sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply
the brake hea
read more