Lincoln Nautilus: Front Disc Brake / Brake Disc. Removal and Installation

Materials

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the wheels and tire.
   Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
   

1. NOTICE: Do not allow the brake caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.

   Remove the bolts and position the brake caliper and anchor plate assembly aside.
   Torque: 122 lb.ft (165 Nm)

1. Remove the brake disc.
   

1. NOTE: Make sure that the mating faces are clean and free of foreign material.

   Clean the brake disc to wheel hub mating surfaces.
   Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B, APM-4-C

Installation

1. NOTICE: Make sure that the brake hose is not twisted when installing the brake caliper or damage to the brake flexible hose may occur.

   To install, reverse the removal procedure.
   

1. Apply the brake pedal several times to verify correct brake system operation.