Lincoln Nautilus: Changing a Road Wheel
Tire Pressure Monitoring System – Warning Lamps
The low tire pressure warning
lamp
has combined functions, as it
warns you when your tires need
air, and when the system is no longer
capable of functioning as intended...
WARNING: If the tire pressure
monitor sensor becomes damaged it may
not function.
Note: The use of tire sealant may damage
your tire pressure monitoring system and
should only be used in roadside
emergencies...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Insert trim tool in location(s) shown.
Rotate the tool 90 degrees to release the overhead console rear retainers.
Working from the rear to the front along each side release the overhead console retainers...
Removal
Remove the wiper pivot arms.
Refer to: Windshield Wiper Pivot Arm (501-16 Wipers and Washers, Removal and Installation).
Disconnect the washer hoses.
Remove the clips.
Release the tabs and lift the cowl panel...
Categories
WARNING: If the tire pressure
monitor sensor becomes damaged it may
not function.
Note: The use of tire sealant may damage
your tire pressure monitoring system and
should only be used in roadside
emergencies. If you must use a sealant, use
the Tire Mobility Kit sealant. Replace the tire
pressure monitoring system sensor and
valve stem on the wheel by an authorized
dealer after use of the sealant.
Note: The tire pressure monitoring system
indicator light will illuminate when the spare
tire is in use. To restore the full function of
the monitoring system, all road wheels
equipped with tire pressure monitoring
sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply
the brake hea
read more