Lincoln Nautilus: Cross Traffic Alert
Lincoln Nautilus 2018-2025 Owners Manual / Cross Traffic Alert
- What Is Cross Traffic Alert? How Does Cross Traffic Alert Work? Cross Traffic Alert Precautions. Cross Traffic Alert Limitations.
- Switching Cross Traffic Alert On and Off. Locating the Cross Traffic Alert Sensors. Cross Traffic Alert Indicators. Cross Traffic Alert – Troubleshooting
- Cross Traffic Alert – Troubleshooting
Locating the Blind Spot Information System Sensors. Blind Spot Information System Indicators. Blind Spot Information System – Troubleshooting
Locating the Blind Spot Information System Sensors
The sensors are behind the rear bumper on
both sides of your vehicle.
Note: Keep the sensors free from snow, ice
and large accumulations of dirt...
What Is Cross Traffic Alert? How Does Cross Traffic Alert Work? Cross Traffic Alert Precautions. Cross Traffic Alert Limitations.
What Is Cross Traffic Alert
The system alerts you of vehicles
approaching from the sides behind your
vehicle when you shift into reverse (R).
How Does Cross Traffic Alert Work
Cross Traffic Alert detects vehicles that
approach at a speed between 4–37 mph
(6–60 km/h)...
Other information:
Lincoln Nautilus 2018-2025 Service Manual: Generator Current Sensor. Removal and Installation
Removal NOTE: Removal steps in this procedure may contain installation details. Disconnect the battery cable from the negative battery post. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures)...
Lincoln Nautilus 2018-2025 Service Manual: Air Conditioning (A/C) Compressor Leak Detection. General Procedures
Leak detection Recover the refrigerant. Refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging procedure in Group 412. Disconnect the refrigerant lines from the A/C compressor. Refer to the appropriate section in Group 412 for the procedure...
Categories
- Manuals Home
- 1st Generation Nautilus Owners Manual
- 1st Generation Nautilus Service Manual
- Switching the Lane Keeping System On and Off. Switching the Lane Keeping System Mode
- Interior Lamp Function. Adjusting the Instrument Panel Lighting Brightness. Ambient Lighting. Interior Lighting – Troubleshooting
- Replacing the Rear Wiper Blades
- New on site
- Most important about car
Changing a Flat Tire
WARNING: If the tire pressure monitor sensor becomes damaged it may not function.
Note: The use of tire sealant may damage your tire pressure monitoring system and should only be used in roadside emergencies. If you must use a sealant, use the Tire Mobility Kit sealant. Replace the tire pressure monitoring system sensor and valve stem on the wheel by an authorized dealer after use of the sealant.
Note: The tire pressure monitoring system indicator light will illuminate when the spare tire is in use. To restore the full function of the monitoring system, all road wheels equipped with tire pressure monitoring sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply the brake hea
Copyright © 2025 www.linautilus.com