Lincoln Nautilus: Active Park Assist / Entering a Perpendicular Parking Space. Exiting a Parking Space
Entering a Perpendicular Parking Space
- Press the active park assist button.
- Select perpendicular parking.
Note: Active park assist does not
recognize
parking space lines and centers your vehicle
between objects.
Note: Active park assist backs your vehicle
into parking spaces.
- Use the turn signal lever to search for a
parking space on the driver or passenger
side of your vehicle.
Note: The system defaults to searching for
a parking spot on the passenger side of your
vehicle if you do not use the turn signal lever.
- Drive your vehicle approximately 3 ft (1 m)
away from and perpendicular to the other
parked vehicles when searching for a
parking space.
Note: A tone sounds and a message
appears in the information and
entertainment display when active park
assist finds a parking space.
- Press and hold the brake pedal.
- Release the steering wheel and shift into
reverse (R).
- Use the accelerator and brake to control
your vehicle's speed when parking. You
are responsible for stopping your vehicle.
- Active park assist is a multi-step process
and requires you to shift the transmission
multiple times. Follow the onscreen
instructions until parking is complete.
Note: Active park assist aligns the front-end
of your vehicle with the lane side of the
object next to it.
Note: When only one object is detected, the
system allows enough distance to open the
door on either side.
Note: You can slow down your vehicle at
any time by pressing the brake pedal.
Exiting a Parking Space
Active park assist only assists leaving parallel
parking spaces.
- Press the active park assist button.
- Select parallel park exit.
- Use the turn signal to choose the
direction to exit the parking space.
- Press and hold the brake pedal.
- Release the steering wheel and shift into
the instructed gear.
- Release the parking brake.
- Use the accelerator and brake to control
your vehicle's speed when exiting the
parking space. You are responsible for
stopping your vehicle.
- Active park assist is multi-step process
and requires you to shift the transmission
multiple times. Follow the onscreen
instructions until operation is complete.
Note: After active park
assist drives your
vehicle to a position where you can exit the
parking space in a forward movement, a
message appears instructing you to take full
control of your vehicle.
- Take control of your vehicle.
Note: You can slow down your vehicle at
any time by pressing the brake pedal.
Switching Active Park Assist On and Off
Press the active park assist
button,
then press the active park assist
icon on the touchscreen to bring
up full screen notifications...
Active Park Assist – Information Messages
Active Park Assist – Frequently Asked Questions
Why does active park assist not operate correctly?
The system is unable to detect a vehicle,
curb or object to park next to or in
between...
Other information:
Removal
Remove the rear axle assembly.
Refer to: Axle Assembly (205-02A)
.
NOTICE:
The RDU contains axle fluid. To prevent spillage, do not tilt the RDU during actuator motor removal or installation.
NOTE:
Mark the installation orientation prior to removal with a marker...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
If installing a new module, it is necessary to
upload the module configuration information to the diagnostic scan tool
prior to removing the module. This information must be downloaded into
the new module after installation...