Other information:
Check
NOTE:
Perform the following pre-checks to make sure module programming completes without errors.
Start the programming session in Key OFF, Engine OFF and prior to initiating programming, turn to KOEO .
Make sure the vehicle battery is fully charged or is
connected to a battery charger...
Exterior Bulb Specification Chart
Note: LED lamps are not serviceable. See an authorized dealer if they
fail.
Removing a Headlamp Assembly
Open the hood. See Opening and
Closing the Hood.
Remove the screws.
Pull the headlamp toward the front of the
vehicle to disengage it from the lower
fixing point...