Lincoln Nautilus: Suspension System - General Information / Front Toe Adjustment. General Procedures
Special Tool(s) /
General Equipment
Adjustment
NOTE:
Make sure that the vehicle is standing on a level surface.
-
Steering wheel in straight ahead position.
-
Using alignment equipment and the manufacturer's instructions, check the front toe setting on both sides.
Use the General Equipment: Wheel Alignment System
-
-
On both sides.
Position aside the steering gear boot clamp.
-
On both sides.
Loosen the outer tie rod end jamb nut.
Torque:
52 lb.ft (70 Nm)
-
NOTE:
Do not allow the steering gear bellows to twist when the inner tie rod is rotated.
Rotate the inner tie-rods an equal amount in either a
clockwise or a counterclockwise direction to adjust the toe setting on
both sides.
-
NOTE:
If equipped with Lane Departure Warning (LDW)
System, camera alignment is required for the lane keeping alert and lane
keeping aid to function correctly.
Connect the scan tool and perform the IPMA camera alignment procedure. Follow the scan tool directions.
Special Tool(s) /
General Equipment
Wheel Alignment System
Adjustment
NOTICE:
Suspension fasteners are critical parts that affect the
performance of vital components and systems...
Special Tool(s) /
General Equipment
Wheel Alignment System
Adjustment
Connect the scan tool and perform the steering toe adjustment. Follow the scan tool directions...
Other information:
System Operation
System Diagram
Item
Description
1
SECM
2
IPMA
3
ABS module
4
PSCM
5
GWM
6
ECU
7
Adaptive steering motor
8
Adaptive steering locking solenoid
9
SASM
10
BCM
11
PCM
12
IPC
13
SCCM
14
RCM
Network Input Message Char..
Special Tool(s) /
General Equipment
Wheel Alignment System
Adjustment
NOTICE:
Suspension fasteners are critical parts that affect the
performance of vital components and systems. Failure of these fasteners
may result in major service expense. Use the same or equivalent parts if
replacement is necessary. Do not use a replacement part of lesser
quality or substitute design. Tighte..
Categories
What Is Auto-Start-Stop
The system is designed to help reduce fuel
consumption and CO2 emissions by stopping
the engine when it is idling, for example at
traffic lights.
Auto-Start-Stop Precautions
WARNING: Apply the parking brake,
shift into park (P), switch the ignition off
and remove the key before you leave your
vehicle. Failure to follow this instruction
could result in personal injury or death.
WARNING: Apply the parking brake,
shift into park (P), switch the ignition off
and remove the key before you open the
hood or have any service or repair work
completed. If you do not switch the ignition
off, the engine could restart at any time.
Failure to follow this instruction could result
in personal injury or d
read more