Lincoln Nautilus: Seatbelt Systems / Seatbelt Procedure After a Collision. General Procedures
Inspection
WARNING:
All seatbelt components must be inspected and corrected as
part of any collision repair. Inspect all seatbelt components as
prescribed by Seatbelt Procedure After a Collision found in Section
501-20A General Procedures of this manual. Failure to follow this
instruction may result in incorrect operation of the seatbelt system and
increase the risk of serious personal injury or death in a crash.
-
Before installing the new seatbelt assembly, inspect the
seatbelt attaching areas for damage and distortion. If the attaching
points are damaged and distorted, work the sheet metal back to its
original shape and structural integrity.
-
Install new seatbelt(s) at any seating position(s) where
deployment has occurred and the seatbelt(s) were used. Carry out the
appropriate Functional Test procedure for all seating positions.
Refer to: Seatbelt Systems (501-20A Seatbelt Systems, Diagnosis and Testing).
Inspection
WARNING:
All seatbelt components must be inspected and corrected as
part of any collision repair. Inspect all seatbelt components as
prescribed by Seatbelt Procedure After a Collision found in Section
501-20A General Procedures of this manual...
Adjustment
NOTE:
Typical seatbelt tongue shown, others similar.
Fold the seatbelt as indicated.
Feed the folded portion of the seatbelt into the seatbelt tongue...
Other information:
Exterior Bulb Specification Chart
Note: LED lamps are not serviceable. See an authorized dealer if they
fail.
Removing a Headlamp Assembly
Open the hood. See Opening and
Closing the Hood.
Remove the screws.
Pull the headlamp toward the front of the
vehicle to disengage it from the lower
fixing point...
Engine coolant reservoir. See Checking the Coolant.
Brake fluid reservoir. See Checking the Brake Fluid.
Battery. See Changing the 12V Battery.
Power distribution box. See Accessing the Under Hood Fuse Box.
Air filter assembly. See Changing the Engine Air Filter...