Other information:
Preliminary Inspection
Visually inspect the CV joints, housing, boots, and clamps for obvious signs of mechanical damage.
If an obvious cause for an observed or reported concern is
found, correct the cause (if possible) before proceeding to the next
step
If the cause is not visually evident, verify the symptom and REFER to Symptom Chart: NVH...
Removal
NOTICE:
Do not press, pull or otherwise move the brake pedal while
installing the stoplamp switch and cruise control deactivation switch.
Install these switches with the booster push rod attached to the brake
pedal and with the brake pedal in the at-rest position...