Lincoln Nautilus: Doors and Locks / Autounlock and Autolock
Autounlock
What Is Autounlock
Autounlock is an unlocking feature that unlocks the vehicle doors when your vehicle comes to a stop.
Autounlock Requirements
Autounlock unlocks all the doors when all of the following occur:
- The ignition is on, all the doors are closed and your vehicle is moving at a speed greater than 12 mph (20 km/h).
- Your vehicle comes to a stop.
- You open the driver door within 10 minutes of switching the ignition off or to the accessory position.
Switching Autounlock On and Off
- Press the menu button on the steering wheel to enter the information display main menu.
- Select Settings.
- Select Vehicle.
- Select Locks.
- Switch Autounlock on or off.
Autolock
What Is Autolock
Autolock is a locking feature that locks your vehicle doors when you start driving.
Autolock Requirements
Autolock locks all the doors when all of the following occur:
- All doors are closed.
- The ignition is on.
- Your vehicle reaches a speed greater than 12 mph (20 km/h).
Operating the Doors From Inside Your Vehicle
Individually Unlocking and Locking the Doors Using the Locking Button
The power door lock control is on the driver
and front passenger door panels.
Unlock...
Mislock
What Is Mislock
Mislock is a locking feature that warns you
if your vehicle has not locked.
Mislock Limitations
When you press the lock button once, the
direction indicators do not flash if:
Any door or the liftgate is open...
Other information:
Lincoln Nautilus 2018-2025 Service Manual: Steering Wheel and Column Electrical Components. Diagnosis and Testing
DTC Charts Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation). BCM DTC Chart DTC Description Action B108A:01 Start Button: General Electrical Failure GO to Pi..
Lincoln Nautilus 2018-2025 Owners Manual: Push Button Ignition Switch
Switching the Ignition Off When the ignition is on or in accessory mode, press the push button ignition switch once without your foot on the brake pedal. Switching the Ignition to Accessory Mode When the ignition is off, press the push button ignition switch once without your foot on the brake pedal. All electrical circuits and accessories are operational and the warning lamps and indicator..
Categories
- Manuals Home
- 1st Generation Nautilus Owners Manual
- 1st Generation Nautilus Service Manual
- Power Outlet - Vehicles With: 110V Power Outlet
- Normal Scheduled Maintenance
- Fuel Quality
- New on site
- Most important about car
Changing a Flat Tire
WARNING: If the tire pressure monitor sensor becomes damaged it may not function.
Note: The use of tire sealant may damage your tire pressure monitoring system and should only be used in roadside emergencies. If you must use a sealant, use the Tire Mobility Kit sealant. Replace the tire pressure monitoring system sensor and valve stem on the wheel by an authorized dealer after use of the sealant.
Note: The tire pressure monitoring system indicator light will illuminate when the spare tire is in use. To restore the full function of the monitoring system, all road wheels equipped with tire pressure monitoring sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply the brake hea
