Lincoln Nautilus: Doors and Locks / Mislock
What Is Mislock
Mislock is a locking feature that warns you
if your vehicle has not locked.
Mislock Limitations
When you press the lock button once, the
direction indicators do not flash if:
- Any door or the liftgate is open.
- The hood is open.
If you switch mislock off, the horn does not
sound if you press the lock button on the
remote control when a door is open.
Switching Mislock On and Off
- Press the menu button on the steering
wheel to enter the information display
main menu.
- Select Settings.
- Select Vehicle.
- Select Locks.
- Switch Mislock Chirp on or off.
Autounlock
What Is Autounlock
Autounlock is an unlocking feature that
unlocks the vehicle doors when your vehicle
comes to a stop.
Autounlock Requirements
Autounlock unlocks all the doors when all of
the following occur:
The ignition is on, all the doors are closed
and your vehicle is moving at a speed
greater than 12 mph (20 km/h)...
Doors and Locks Audible Warnings
Door Ajar Audible Warning
Sounds when a door is not fully closed and
your vehicle is moving.
Doors and Locks – Troubleshooting
Doors and Locks – Warning Lamps
Door Ajar Warning Lamp
It illuminates when you switch
the ignition on and remains on if any door or the hood is open...
Other information:
What Is Distance Alert
The system alerts you with a warning lamp
if the distance to the vehicle ahead is small.
Note: The warning lamp does not illuminate
if cruise control or adaptive cruise control is
active.
Adjusting the Sensitivity of Distance Alert
To adjust the sensitivity of the system, use
the instrument cluster display:
Using the instrument cluster display
controls on the steerin..
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
WARNING:
Before beginning any service procedure in this
manual, refer to health and safety warnings in section 100-00 General
Information. Failure to follow this instruction may result in serious
personal injury.
Refer to: Pyrotechnic Device Health and Safety Precautions (100-00 General Informat..
Categories
How Does Traction Control Work
If your vehicle begins to slide, the system
applies the brakes to individual wheels and,
when needed, reduces power at the same
time. If the wheels spin when accelerating
on slippery or loose surfaces, the system
reduces power in order to increase traction.
Switching Traction Control On and Off
WARNING: The stability and traction
control light illuminates steadily if the
system detects a failure. Make sure you
did not manually disable the traction
control system using the information
display controls or the switch. If the stability
control and traction control light is still
illuminating steadily, have the system
serviced by an authorized dealer
immediately. Operating your vehicle with
the traction co
read more