Other information:
Removal
NOTICE:
Do not press, pull or otherwise move the brake pedal while
installing the stoplamp switch and cruise control deactivation switch.
Install these switches with the booster push rod attached to the brake
pedal and with the brake pedal in the at-rest position...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI process must begin with the current HSWM installed. If the
current HSWM does not respond to the diagnostic scan tool, the tool may
prompt for As-Built Data as part of the repair...