Overview
Power Windows
Standard front door power window features include one-touch up and one-touch down operation.
The window control switch:
Rear Window Defrost
When the rear window defrost button on the touchscreen or the max defrost button is pressed, the HVAC module activates the rear window defrost relay (integral to the BJB ). When the rear window defrost relay is active, the rear window defrost grid is energized.
Remote Start - Rear Window Defrost Operation
The customer can select different climate control modes/preferences when the vehicle is started using the remote start feature. This can be accessed through the message center. When the rear window defrost is set to AUTO mode, the rear window defrost activates when the outside temperature is less than 0° C (32° F) and the vehicle is started using the remote start feature. No climate control adjustments are recognized during remote start operation. Once the ignition is cycled to the ON position, the climate control system returns to the previous settings (last ignition ON cycle) and adjustments can be made normally. If the previous setting was off, the climate control system turns off. For additional information on setting the remote start preferences, refer to the Owner's Literature.
WARNING: If the tire pressure monitor sensor becomes damaged it may not function.
Note: The use of tire sealant may damage your tire pressure monitoring system and should only be used in roadside emergencies. If you must use a sealant, use the Tire Mobility Kit sealant. Replace the tire pressure monitoring system sensor and valve stem on the wheel by an authorized dealer after use of the sealant.
Note: The tire pressure monitoring system indicator light will illuminate when the spare tire is in use. To restore the full function of the monitoring system, all road wheels equipped with tire pressure monitoring sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply the brake hea