Lincoln Nautilus: Maintenance / Under Hood Overview - 2.7L
- Engine coolant reservoir. See Checking the Coolant.
- Brake fluid reservoir. See Checking the Brake Fluid.
- Battery. See Changing the 12V Battery.
- Power distribution box. See Accessing the Under Hood Fuse Box.
- Air filter assembly. See Changing the Engine Air Filter.
- Engine oil dipstick. See Engine Oil Dipstick Overview.
- Engine oil filler cap. See Adding Engine Oil.
- Windshield washer fluid reservoir. See Adding Washer Fluid.
Engine coolant reservoir. See Checking the Coolant.
Engine oil dipstick. See Engine Oil Dipstick Overview.
Engine oil filler cap. See Adding Engine Oil...
Engine Oil Dipstick Overview - 2.0L
Minimum.
Nominal.
Maximum.
Engine Oil Dipstick Overview - 2.7L
Minimum.
Nominal.
Maximum.
Checking the Engine Oil Level
Make sure that your vehicle is on level
ground...
Other information:
System Operation
System Diagram
Item
Description
1
LH front valve solenoid
2
PSCM
3
PCM
4
ABS module
5
LH front height sensor
6
RH front height sensor
7
LH rear height sensor
8
RH rear height sensor
9
VDM
10
BCM
11
RH front valve solenoid
12
LH rear valve solenoid
13..
Inspection
NOTE:
A coolant leak in the heater hose could follow the
heater core tube to the heater core and appear as a leak in the heater
core.
Inspect for evidence of coolant leakage at the heater hose to heater core attachments.
NOTE:
Spring-type clamps are installed as original
equipment. Installation and overtightening of nonspecified clamps can
cause leakage at ..
Categories
WARNING: If the tire pressure
monitor sensor becomes damaged it may
not function.
Note: The use of tire sealant may damage
your tire pressure monitoring system and
should only be used in roadside
emergencies. If you must use a sealant, use
the Tire Mobility Kit sealant. Replace the tire
pressure monitoring system sensor and
valve stem on the wheel by an authorized
dealer after use of the sealant.
Note: The tire pressure monitoring system
indicator light will illuminate when the spare
tire is in use. To restore the full function of
the monitoring system, all road wheels
equipped with tire pressure monitoring
sensors must be mounted on the vehicle.
If you get a flat tire while driving, do not apply
the brake hea
read more